5G INDOOR CPE FX2000 USER GUIDE 33
Software Update Tab
Software updates are delivered to the 5G Indoor CPE automatically over the mobile network. This tab
displays your current software version, last system update information, software update history, and
allows you to check for new software updates.
Current Software
Software Version: The version of the software currently installed on your 5G Indoor CPE.
Check for Software Update
Last check for update: The date and time the FX2000 last checked to see if an update was available.
Update status: This is area is usually blank. If you check for an update, the results display.
Check for Update: Click this button to manually check for available software updates. If a new
software update is available, it is automatically downloaded.
Last Software Update
This section displays details about the last software update.
Software Update History
This section displays details of the last updates that have been downloaded and installed to this
device. If no updates have been installed, this section is not displayed.