5G INDOOR CPE FX2000 USER GUIDE 49
SIM Tab
The SIM card in your 5G Indoor CPE can be locked using a PIN. If the SIM card is locked, you must enter
the PIN before connecting to the mobile network. Once entered, the PIN is remembered until the next
shutdown. You may also need to provide the existing PIN to change a SIM. The default PIN is available
from your service provider.
Use this page to unlock your SIM or enter a SIM PIN.
SIM Settings
SIM PIN lock: The status of the SIM PIN lock.
SIM status: The current status of the SIM card. Possible states include:
Ready – No SIM PIN is needed.
PIN Locked - SIM PIN must be entered before you can use the mobile network. NOTE: If an
incorrect PIN is entered too many times, the SIM becomes PUK locked. A counter indicates
how many incorrect entries will cause PUK lock. Once PUK locked, the PUK must be obtained
from your service provider.
PUK Locked - PUK (personal unblocking key) for the SIM must be entered in order to continue.
The PUK can be obtained from your service provider. Enter the PUK. Enter and confirm a new
PIN and click Unlock. NOTE: If an incorrect PUK is entered too many times, the SIM becomes
permanently unusable. You will need to obtain a new SIM. A counter indicates how many
entry attempts remain.
Unlocked - SIM PIN was needed, but has already been entered.
No SIM - No SIM is detected. Check that the SIM is inserted correctly.
SIM Error - SIM is detected, but is not responding as expected and cannot be used.
Desired action: The actions available depend on the SIM status. Possible operations include:
Turn on PIN Lock - Sets the SIM so that entry of a PIN is required upon startup to connect to the
mobile network. To perform this operation, you must enter the current PIN.
To Next Page
Loading...
