5G INDOOR CPE FX2000 USER GUIDE 15
Overview
You can configure your FX2000 to best suit your needs, including: changing your network name
and/or passwords, setting up a guest network, viewing all currently connected devices, and setting
device preferences.
There are multiple tools for configuring your 5G Indoor CPE:
• Inseego Mobile App – Allows you to perform basic device monitoring and management. This
is the same app you used to identify a location for your FX2000.
• Admin Web UI – Provides a local gateway to configure and manage your FX2000. On a device
connected to your FX2000, open any Web browser and go to http://192.168.1.1. Select Sign In
(in the top-right corner of the screen), and enter the Admin Password printed on the bottom
of the FX2000.
• Inseego Connect – Enables you to monitor and configure an entire deployment of devices.
You can group devices together to push widespread configurations, troubleshoot individual
devices, set alarms, and run reports. Go to connect.inseego.com to sign up for a free Inseego
Connect account.
This chapter provides the configuration options available for your FX2000 devices. The configurations
shown are from the Admin Web UI, unless otherwise noted. Many of these options are also available
with Inseego Mobile App and Inseego Connect. Some configurations are available only with Inseego
Connect, and are marked as such.
To Next Page
Loading...
Need help?
General
