5G INDOOR CPE FX2000 USER GUIDE 71
Product Certifications and Supplier’s Declarations of
Conformity
Product Certifications and Supplier’s Declarations of Conformity documentation may be consulted at
Inseego Corp., 9710 Scranton Road Suite 200, San Diego CA 92121, USA.
https://www.inseego.com/support/
.
Energy Efficiency
Efficiency performance is based on the U.S. Department of Energy Federal Energy Conservation
Standards for Battery Chargers.
Energy efficiency terms - the energy efficiency values are based on the following conditions:
• Power adapter, no-load: Condition in which the FX2000 power adapter is connected to AC
power, but not connected to device.
• Power adapter efficiency: Average of the FX2000 power adapter with the measured
efficiency when tested at 100 percent, 75 percent, 50 percent, and 25 percent of the power
adapter’s rated output current.
Mode
Power Consumption for FX2000
Wireless Communications
IMPORTANT: Due to the transmission and reception properties of wireless communications, data
occasionally can be lost or delayed.
This can be due to the variation in radio signal strength that results from changes in the characteristics
of the radio transmission path. Although data loss is rare, the environment where you operate the
modem might adversely affect communications.
Variations in radio signal strength are referred to as fading. Fading is caused by several different
factors including signal reflection, the ionosphere, and interference from other radio channels.
Inseego Corp. or its partners will not be held responsible for damages of any kind resulting from the
delays or errors in data transmitted or received with the FX2000 device, or failure of the FX2000 device
to transmit or receive such data.
To Next Page
Loading...
