5G INDOOR CPE FX2000 USER GUIDE 36
VPN Tab
The 5G Indoor CPE allows you to establish secure connections to remote networks over a public
network using Open VPN.
NOTE: When an Open VPN connection is established, Port Filtering and Port Forwarding settings are
not effective, as traffic from all connected devices goes through the Open VPN tunnel.
To configure a VPN connection, click Configure Open VPN Settings.
Open VPN Configuration Files: Drag and drop the Open VPN configuration files from your Open VPN
provider in the file upload area.
Username: Enter your Open VPN connection username here.
Password: Enter your Open VPN connection password here.
Auto-connected VPN: When the ON/OFF slider is ON, the VPN tunnel will automatically be
established whenever an Internet connection is made. When OFF, the VPN connection must be
established manually.
Clear all Open VPN settings: This button deletes all VPN files, logs, and resets all VPN settings.
Click Save Changes and Connect to save your configurations and connect to the VPN server.
To Next Page
Loading...
Need help?
General
