5G INDOOR CPE FX2000 USER GUIDE 23
2.4 GHz Band Settings
This section displays the 802.11 Mode in use when the 2.4 GHz band is active and allows you to select
a Channel.
NOTE: Leave the Channel set to Automatic unless you need to choose a particular channel for your
environment.
5 GHz Band Settings
This section displays the 802.11 Mode in use when the 5 GHz band is active and allows you to select a
Bandwidth and Channel.
Bandwidth: Leave bandwidth at the default setting unless you experience interference with other Wi-
Fi devices. If you experience interference, try lowering the setting to reduce the interference.
NOTE: Leave the Channel set to Automatic unless you need to choose a particular channel for your
environment.
Select Save Changes to store new settings.
To Next Page
Loading...
