5G INDOOR CPE FX2000 USER GUIDE 54
End DHCP Address Range at: The end of the IP address range used by the DHCP server. If the IP is set
on the client device, use an IP address outside of this DHCP range; if the IP address is set using an IP
reservation, it will usually be inside this range. NOTE: Only expert users should change this setting.
IPv6
Turn on IPv6: Check the box if the connected device supports IPv6. This enables IPv6 connected
devices to make IPv6 connections to the Internet.
Link-Local Address: The Link-Local IPv6 address if the connected device supports IPv6.
Click Save Changes to activate and save new settings.
To Next Page
Loading...
