Chapter: Introduction
22 M10-17313-EN
Conformity with EU directives
Instron
®
declares under our sole responsibility that 34SC and 34TM testing systems are
in conformity with all relevant provisions of the following regulations:
• Machinery Directive 2006/42/EC
• EMC Directive 2014/30/EU
• ROHS Directive 2011/65/EU including substances added by amendment 2015/
863/EU
Instron
®
testing systems are CE marked. A signed CE declaration of conformity is
supplied with each system.
Crush hazard Indicates the crush hazard of the moving
crosshead and instructs the user to read
and understand the operator’s manual
before using the machine.
Waste Electrical and
Electronic Equipment
(WEEE)
In accordance with the European Union’s
WEEE directive, the crossed out wheeled
bin symbol indicates that the equipment
must be disposed of separately from other
waste at the end of its usable life. For
advice on the disposal of electrical and
electronic equipment in your country,
contact your local Instron representative.
Table 3. Safety and Information Labeling Descriptions (Continued)
Label Meaning Purpose
Crush hazard.
Keep clear of test
area when machine
is in motion.
Read and understand
operator's manual
before using this
machine.
!
WARNING
To Next Page
Loading...
Need help?
General
