Intec CS5000 - Page 52

- 96 - - 97 -
Printing from the Multi-Purpose Tray Printing from the Multi-Purpose Tray
AppendixSetting Up
2
Before Use
1
Printing
3
Basic Device Operations
4
Index
AppendixSetting Up
2
Before Use
1
Printing
3
Basic Device Operations
4
Index

Using Windows PCL Printer Drivers
1
Open the fi le to be printed using
WordPad.
2
Click [Page Setup] in the [File] menu.
3
Select the paper size and print
orientation, and click [OK].
4
Click [Print] in the [File] menu.
5
Click [Preferences].
6
Select [Size] in the [Setup] tab.
7
Select [Multipurpose Tray] in [Source].
8
Click [Paper Feed Options].
Memo

To print pages individually, enable [Use MP tray as
manual feed] in [Multi Purpose Tray Settings], and
click [OK].
9
Select a suitable value in [Weight], and
click [OK].
Memo

Normally, select [Printer Setting]. Select [Printer
Setting] to use the values set using the printer
control panel.
10
Click [Print] in the "Print" screen to
print.
7
Select [Paper Size] from [Paper/Output]
in the "Advanced Options" tab.
8
Select [Multi-Purpose Tray] in [Paper
Source] in the [Paper/Quality] tab, and
click [Advanced].
9
Select a suitable value from [Media
Weight] in the "Advanced Options"
screen, and then click [OK].
Memo

Normally, select [Auto]. Select [Auto] to use the
value set using the printer control panel.

To print pages individually, set [Multipurpose tray is
handled as manual feed] to [Yes].
10
Click [OK] in the "Printing Preferences"
screen.
11
Click [Print] in the "Print" screen to
print.