Intec CS5000 - Default Chapter; Manual Configuration; About the Enclosed Software DVD-ROM

- 2 - - 3 -

Manual Con guration
The following user manuals are enclosed with the product.
The e-manual is stored on the "Software DVD-ROM".
Basic (This manual)
Preparing the printer to print
Try using various functions
Read for any points that are not understood, or for maintenance
Using CS5000
This guide describes the precautions for safe
use of the device. Make sure to read before use.
Further, basic uses from the device installation
methods to initial printing are also explained.
The device functions are described in the
appendix.
Read these guides as necessary
Advanced
2
Step
This guide explains the various paper print methods
and how to use useful functions. Read to optimize the
printing environment or to adjust the color, etc., using
the enclosed utility software.
Further, this guide also explains the items that can be
set from the control panel, and the network settings.
Troubleshooting/Daily
Maintenance Manual
This manual explains the procedures for paper jams, and
troubleshooting method if an error message is displayed. This
manual also explains daily maintenance such as now to replace
consumables and maintenance units, and cleaning, etc.
•
Troubleshooting
•
Maintenance
•
Consumables, maintenance products,
options, color management server,
etc.
・
E-format
・
E-format
・
E-format
Read this first
Easy Guide (Set-up Guide)
Opening the box and installing the printer
1
Step
This guide uses illustrations to explain the
methods from opening the box to installation.
For the advanced setup guide, see the "Basic".
・
Pamphlet
•
Checking the product
•
Parts nomenclature and functions
•
Using the device to its fullest
•
Installing the device
•
Turning ON and OFF the power supply
•
Test printing using the printer only
•
Connecting to a PC
•
Paper
•
Printing
•
Paper ejection
•
Setting Power Save mode
•
Setting auto power OFF
•
Checking the print quantity,
consumables, remaining maintenance
unit quantity, and remaining service life
•
Cancelling a print job
•
Adding printers using LPD protocols
(TCP/IP)
•
Table of control panel menu items
•
Basic Windows procedures
•
Printer specifications
•
Useful print functions
•
Adjusting the color
•
Using utility software
•
Network settings
•
Checking and changing printer settings
using the control panel
Separate Volume Spot Color Guide
This guide explains how to set up the Spot
Color kit and check the printer drivers, and
how to print using Spot Color. Make sure to
read before use.
•
Setting the Spot Color kit
•
Control panel explanation
•
Checking the printer drivers
•
Table of printer driver functions
•
Printing on color paper
•
Printing on transparent film
•
Specifying and printing Spot Color
toner using the applications
•
Fine-tuning white
•
Switching Spot Color kits
・
E-format
4
Basic Device
Operations
2
Setting Up
Before
use
User's Manual
Basic
○
This manual contains cautions on how to use this product safety.
Before you use this product, please make sure that you read this manual.
○
Carefully store this manual close to hand so.
1
Appendix
Index
3
Printing
Read for any points that
are not understood, or
for maintenance
1
Troubleshooting
2
Maintenance
Index
User’s Manual
Troubleshooting/Daily
Maintenance Manual
Store this manual carefully close to hand so it can be viewed at any time.
User's Manual
Separate Volume Spot Color Guide

About the Enclosed " Software DVD-ROM"
When the "software DVD-ROM" enclosed with the device is placed in the DVD-ROM drive, the following
menu screen will be displayed.
Memo

This example uses the Windows screens.

If using a Macintosh, double-click the [Intec] icon.
Describes the selected
printer and PC connection
type.
Click here to install the standard
printer drivers.
You can add and select printer
drivers.
To learn the easy device functions
and various settings, see the PDF
manual from here.
*2
You can install and set the device
utility software.
Select the printer
model.
Select the device and
PC connection method.
You can register as a
user from the Intec
homepage.
*1
Close the "Software
DVD-ROM".
*1: Access is only possible using an internet-enabled environment.
*2: To view the PDF manual, Adobe Reader/Adobe Acrobat Reader is required.