57
Input Setup
2. Input Setup Menu
This menu allows you to make the various settings concerning the
signals input from the various input sources that you use with the
DTC-9.4. The settings made in this menu are valid for the input
source that is currently selected with the input source buttons at the
front panel and, therefore, these settings are made separately for each
input source. Each input source may have a great number of settings
that are difficult to keep track of, so we recommend making a chart
to record what you have set and for which component to prevent
confusion later.
When NET AUDIO is not selected as the input source
Advanced Menu
2.Input Setup
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.IntelliVolume
6.Listening Mode Preset
|ENTER|Quit:|SETUP|
Input:DVD
Advanced Menu
2.Input Setup
2-1.Digital Setup
a.Digital Input
:COAX1
b.Digital Format
:All
Quit:|SETUP|
Input:DVD
Input:DVD
2-1. Digital Setup Sub-menu (When Net Audio is
not selected as the input source)
This sub-menu concerns the input of digital signals from input
sources and if these settings are incorrectly made, the digital audio
signals may not be properly output, or not heard at all. This sub-
menu will not appear if the selected input source button is AM or
FM. It cannot be accessible if “Yes” is selected in 2-2. Multichannel
Setup Sub-menu and “Multichannel” is selected in the Audio
Selector. Furthermore, since VIDEO 5 is fixed to the optical digital
terminal on the front panel, this sub-menu will not appear if VIDEO
5 is selected.
Initial settings for each input source
Input source Digital input
CD OPT 1
PHONO ----
TUNER
TAPE OPT 2
VIDEO 1 COAX 2
VIDEO 2 COAX 3
VIDEO 3 OPT 3
VIDEO 4 OPT 4
VIDEO 5 OPTICAL on front panel (fixed)
DVD COAX 1
NET AUDIO
---- : Available for digital input but not set in initial settings.
: Not available for digital input.
a. Digital Input
This setting tells the DTC-9.4 which input source button on the front
panel is connected with which digital input jack on the rear panel. To
perform this setting, you must first select a digital input source at the
front panel and then set the name of the digital input jack it is
connected to with this setting.
For example, if the input source selected at the front panel is CD and
the compact disc player is connected to DIGITAL INPUT OPT 1,
then select “OPT1” here. If the input source selected is not connected
to a digital input, then select “----.”
OPT1-4: Select if the input source is connected to any of the
DIGITAL INPUT OPT jacks 1 through 4.
COAX1-3: Select if the input source is connected to any of the
DIGITAL INPUT COAX jacks 1 through 3.
----: Select if the input source is not from a digital input jack.
To Next Page
Loading...
Need help?
General
