70
4-1. Volume Setup Sub-menu
This sub-menu allows you to make various settings concerning the
volume control of the DTC-9.4.
a. Volume Display
You can choose from two ways of displaying the volume setting on
screen.
Absolute: This displays the volume with a minimum of 0 for no
sound and a maximum of 100. As a reference, the volume setting
of Ref (82) is equivalent to 0 decibels for the relative display
method.
Relative: This displays the volume as a decibel value on a scale
with a designated reference point that is displayed as 0, which
equals the volume setting of 82 of the absolute display method.
With this display method, the minimum value is –∞, the next
highest is –81 decibels, and the maximum value is +18 decibels.
b. Muting Level
This sets the attenuation level during playback when the Muting
button is pressed on the remote controller. This can be set to –∞, or
between –50 and –10 decibels in 10-decibel increments.
c. Maximum Volume
This setting allows you to set the maximum volume that can be
output with the Master Volume dial. Setting a maximum volume
allows you to prevent components from being damaged by
excessively loud volumes. For the absolute volume display method,
this can be set between 50 and 99. For the relative volume display
method, this can be set between –32 and +17 decibels. To not set a
maximum volume, select “Off.”
d. Power On Volume
This sets a designated volume for which the DTC-9.4 will be set to
every time that the power is turned on. This prevents the DTC-9.4
from suddenly outputting very loud sounds if it is turned on while it
is set to an extremely high volume. For the absolute volume display
method, this can be set between 0 and 100. For the relative volume
display method, this can be set to –∞, or between –81 and +18
decibels. To have the DTC-9.4 turned on with its current volume
setting, set this to “Last.”
Preference
4. Preference Menu
Advanced Menu
4.Preference
1.Volume Setup
2.Headphones Level
3.OSD Setup
4.OSD Position
|ENTER|Quit:|SETUP|
Advanced Menu
4.Preference
4-1.Volume Setup
a.Volume Display
:Absolute
b.Muting Level
:-oodB
c.Maximum Volume
:Off
d.Power On Volume
:Last
Quit:|SETUP|
To Next Page
Loading...
Need help?
General
