Integra DTC-9.4 User Manual

64
Audio Adjust
3. Audio Adjust Menu
Set the various parameters for the sound signals.
Advanced Menu
3.Audio Adjust
1.Tone Control
2.Surround Speakers
3.Sound Effect
4.Delay
5.LFE Level
6.Mono
7.Theater-Dimensional
8.Surround
Advanced Menu
3.Audio Adjust
9.THX
10.Mono Movie
11.Enhanced 7
12.Orchestra
13.Unplugged
14.Studio-Mix
15.TV Logic
→ default
Advanced Menu
3.Audio Adjust
3-1.Tone Control
a.Bass : 0
b.Treble : 0
Quit:|SETUP|
3-1. Tone Control Sub-menu
Separately adjust the bass and treble settings in 2-step increments.
Setting Values Initial value
a. Bass –12 to +12 0
b. Treble –12 to +12 0
3-2. Surround Speakers Sub-menu
This sub-menu allows you to decide which speakers to output to
when you are playing back a 5.1-channel source with surround back
speakers connected to a power amplifier.
Setting Values Initial value
a. Surround Speakers Surround L/R, Surround Back, Surround L/R
Surr L/R + Back
Surround L/R: Select to output the sound to the surround left
and right speakers as normal and outputs nothing to the surround
back speaker.
Surround Back: Select to output the sound to the surround back
speakers and outputs nothing to the surround left and right
speakers.
Surr L/R+Back: Select to output the sound to both the surround
left and right speakers and the surround back speaker.

Integra DTC-9.4 Specifications

General

Brand	Integra
Model	DTC-9.4
Category	Controller
Language	English