Dual-Core Intel® Xeon® Processor 5100 Series Thermal/Mechanical Design Guide 79
Safety Requirements
C Safety Requirements
Heatsink and attachment assemblies shall be consistent with the manufacture of units
that meet the safety standards:
1. UL Recognition-approved for flammability at the system level. All mechanical and
thermal enabling components must be a minimum UL94V-2 approved.
2. CSA Certification. All mechanical and thermal enabling components must have CSA
certification.
3. Heatsink fins must meet the test requirements of UL1439 for sharp edges.
§
To Next Page
Loading...
Need help?
General
