Dual-Core Intel® Xeon® Processor 5100 Series Thermal/Mechanical Design Guide 85
Enabled Suppliers Information
EEnabled Suppliers
Information
E.1 Supplier Information
E.1.1 Intel Enabled Suppliers
The Intel reference enabling solution for Dual-Core Intel Xeon Processor 5100 Series is
preliminary. The Intel reference solutions have not been verified to meet the criteria
outlined in Appendix D. Customers can purchase the Intel reference thermal solution
components from the suppliers listed in Table E-1.
For additional details, please refer to the Dual-Core Intel Xeon Processor 5100 Series
thermal mechanical enabling components drawings in Appendix A.
Table E-1. Suppliers for the Dual-Core Intel Xeon Processor 5100 Series Intel Reference
Solution (Sheet 1 of 2)
Assembly Component Description
Development
Suppliers
Supplier Contact Info
CEK771-01-2U
(for 2U, 2U+)
CEK Heatsinks
Intel Reference
Heatsink p/n
C61708 rev03
- or -
Intel Boxed
Heatsink p/n
D36871
Copper Fin, Copper
Base
includes PCM45F
TIM+cover
Fujikura
CNDA 1242012
(stacked fin)
Fujikura America
Ash Ooe
a_ooe@fujikura.com
408-748-6991
Fujikura Taiwan Branch
Yao-Hsien Huang
yeohsien@fujikuratw.com.tw
886(2)8788-4959
CEK Heatsink
Intel Boxed
Heatsink p/n
D36871
Copper Fin, Copper
Base
includes PCM45F
TIM+cover
Furukawa
CNDA 65755
(Crimped fin)
Furukawa America
Timothy Yu
yu@FurukawaAmerica.com
408-345-1528
Furukawa Taiwan Branch
Johnson Tseng
Johnson@tfe.com.tw
(02)2563-8148x15
Thermal Interface
Material
Grease Shin-Etsu G751
CNDA 75610
Donna Hartigan
(480) 893-8898
CEK Spring for
CEK771
Intel p/n D13646
rev04
Stainless Steel 301,
Kapton* Tape on
Reinforced Spring
Fingers
AVC
CNDA 2085011
David Chao
886-2-22996390 x619
david_chao@avc.com.tw