Intel Desktop Board D850MD/D850MV Technical Product Specification
102
4.4.3 Peripheral Configuration Submenu
To access this submenu, select Advanced on the menu bar and then Peripheral Configuration.
Maintenance Main
Advanced
Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
The submenu represented in Table 67 is used for configuring computer peripherals.
Table 67. Peripheral Configuration Submenu
Feature Options Description
Serial Port A • Disabled
• Enabled
• Auto (default)
Configures serial port A.
Auto
assigns the first free COM port, normally COM1, the
address 3F8h and the interrupt IRQ4.
An * (asterisk) displayed next to an address indicates a
conflict with another device.
Base I/O address
(This feature is present
only when Serial Port A
is set to
Enabled
)
• 3F8 (default)
• 2F8
• 3E8
• 2E8
Specifies the base I/O address for serial port A, if serial port A
is set to
Enabled.
Interrupt
(This feature is present
only when Serial Port A
is set to
Enabled
)
• IRQ 3
• IRQ 4
(default)
Specifies the interrupt for serial port A, if serial port A is set to
Enabled.
Serial Port B • Disabled
• Enabled
• Auto (default)
Configures serial port B.
Auto
assigns the first free COM port, normally COM 2, the
address 3F8h and the interrupt IRQ4.
An * (asterisk) displayed next to an address indicates a
conflict with another device.
Base I/O address
(This feature is displayed
only if Serial Port B is set
to
Enabled.
)
• 3F8
• 2F8 (default)
• 3E8
• 2E8
Specifies the base I/O address for serial port B, if serial port B
is set to
Enabled
.
Interrupt
(This feature is displayed
only if Serial Port B is set
to
Enabled.
)
• IRQ 3
(default)
• IRQ 4
Specifies the interrupt for serial port B, if serial port B is set to
Enabled
.
continued
To Next Page
Loading...
