Intel Desktop Board D850MD/D850MV Technical Product Specification
112
4.6.1 APM Submenu
To access this menu, select Power from the menu bar at the top of the screen and then APM.
Maintenance Main Advanced Security
Power
Boot Exit
APM
ACPI
The submenu represented in Table 75 is for setting the APM power options.
Table 75. APM Submenu
Feature Options Description
Power Management • Disabled
• Enabled (default)
Enables or disables the APM power management
feature.
Inactivity Timer • Off
• 1 Minute
• 5 Minutes
• 10 Minutes
• 20 Minutes (default)
• 30 Minutes
• 60 Minutes
• 120 Minutes
Specifies the amount of time before the computer
enters APM standby mode.
Hard Drive • Disabled
• Enabled (default)
Enables power management for hard disks during
standby modes.
4.6.2 ACPI Submenu
To access this menu, select Power from the menu bar at the top of the screen and then ACPI.
Maintenance Main Advanced Security
Power
Boot Exit
APM
ACPI
The submenu represented in Table 75 is for setting the ACPI power options.
Table 76. ACPI Submenu
Feature Options Description
ACPI Suspend State • S1 State (default)
• S3 State
Specifies the ACPI sleep state.
Wake on LAN
†
from S5 • Stay Off (default)
• Power On
In ACPI soft-off mode only, determines how the
system responds to a LAN wake-up event.