EasyManuals Logo

Intel SE7520BD2 Technical Product Specification

Intel SE7520BD2
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
Intel® Server Board SE7520BD2 Technical Product Specification BIOS Architecture
Revision 1.3 Intel Confidential
53
NMI Control Disabled
Enabled
Enable / disable NMI control for the
front panel NMI button.
Default settings:
For mBMC: “Disabled”
For IMM: “Enabled”
3.2.8 Server Menu
Table 30. BIOS Setup, Server Menu Selections
Feature Options Help Text Description
System management N/A N/A Selects submenu.
Serial Console Features N/A N/A Selects submenu.
Event Log configuration N/A Configures event logging. Selects submenu.
Assert NMI on SERR Disabled
Enabled
If enabled, NMI is generated on
SERR and logged.
Assert NMI on PERR Disabled
Enabled
If enabled, NMI is generated.
SERR option needs to be
enabled to activate this option.
Grayed out if “NMI on
SERR” is disabled.
Resume on AC Power Loss Stays Off
Power On
Last State
Determines the mode of
operation if a power loss occurs.
Stays off, the system will remain
off once power is restored. Power
On, boots the system after power
is restored.
“Last State” is only
displayed if the Intel
Management Module is
present. When
displayed, “Last State” is
the default.
When set to “Stays Off,”
“Power Switch Inhibit” is
disabled.
FRB-2 Policy Disable BSP
Do not disable BSP
Retry on Next Boot
Disable FRB2 Timer
This controls action if the boot
processor will be disabled or not.
“Disable BSP” and “Do
not disable BSP” are only
displayed if the Intel
Management Module is
present.
Late POST Timeout Disabled
5 minutes
10 minutes
15 minutes
20 minutes
This controls the time limit for
add-in card detection. The
system is reset on timeout.
Hard Disk OS Boot Timeout Disabled
5 minutes
10 minutes
15 minutes
20 minutes
This controls the time limit
allowed for booting an operating
system from a Hard disk drive.
The action taken on timeout is
determined by the OS Watchdog
Timer policy setting.
PXE OS Boot Timeout Disabled
5 minutes
10 minutes
15 minutes
20 minutes
This controls the time limit
allowed for booting an operating
system using PXE boot. The
action taken on timeout is
determined by OS Watchdog
Timer policy setting.

Table of Contents

Other manuals for Intel SE7520BD2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel SE7520BD2 and is the answer not in the manual?

Intel SE7520BD2 Specifications

General IconGeneral
BrandIntel
ModelSE7520BD2
CategoryServer Board
LanguageEnglish

Related product manuals