30 i3/i4 Satellite Antenna System – Install and User Manual
Setting the Satellite Pair
You can change the satellite pair if you decide to receive satellite television
service from a different service provider.
CASE 1. DiSEqC is not used for changing target satellite.
SETUP MODE?
YES NO
SET SAT PAIR ?
PREV YES NEXT
SAT A : DTV101
PREV SELECT NEXT
SAT B : DTV119
PREV SELECT NEXT
SAVE ?
YES NO
1. Press YES to enter setup mode.
2. Press YES to set satellite pair.
SET TRIPLE SAT ?
YES NO
3. Press YES to set triple satellite.
SAT C: DTV110#
PREV SELECT NEXT
4. Set satellite A
Press PREV to show previous satellite name.
Press SELECT to set chosen satellite to SAT A.
Press NEXT to show next satellite name.
5. Set satellite B
Press PREV to show previous satellite name.
Press SELECT to set chosen satellite to SAT B.
Press NEXT to show next satellite name.
7. Press YES to save selections.
Press NO to cancel and retu rn to main setup mode.
6. Set satellite C
Press PREV to show previous satellite name.
Press SELECT to set chosen satellite to SAT C.
Press NEXT to show next satellite name.
To Next Page
Loading...
