Intellian i3 - Operating the ACU - Satellite Data Editing; Edit Satellite Information

Operation Using the ACU 31
CASE 2. DiSEqC is used for changing of target satellite.
SETUP MODE?
YES NO
SET SAT PAIR ?
PREV YES NEXT
SAT A : DTV101
PREV SELECT NEXT
SAT B : DTV119
PREV SELECT NEXT
SAVE ?
YES NO
SAT A* : DTV101
PREV SELECT NEXT
SAT B* : DTV119
PREV SELECT NEXT
1. Press YES to enter setup mode.
2. Press YES to set satellite pair.
7. Press YES to save selections.
Press NO to cancel and return to main setup mode.
3. Set satellite A
Press PREV to show previous satellite name.
Press SELECT to set chosen satellite to SAT A.
Press NEXT to show next satellite name.
4. Set satellite B
Press PREV to show previous satellite name.
Press SELECT to set chosen satellite to SAT B.
Press NEXT to show next satellite name.
5. Set satellite A* when DiSEqC is active from IRD.
Press PREV to show previous satellite name.
Press SELECT to set chosen satellite to SAT A*.
Press NEXT to show next satellite name.
6. Set satellite B* when DiSEqC is active from IRD.
Press PREV to show previous satellite name.
Press SELECT to set chosen satellite to SAT B*.
Press NEXT to show next satellite name.