Intellian i3 - Page 36

32 i3/i4 Satellite Antenna System – Install and User Manual
Edit Satellite information
It is possible to modify the existing satellite information and input new satellite
information from ACU as well. It is not recommended for a novice at satellite
service to use this mode.
SETUP MODE?
YES NO
SET SAT PAIR ?
PREV YES NEXT
SAT NAME : DTV101
PREV SELECT NEXT
x2
EDIT SAT INFO ?
PREV YES NEXT
SAT NAME : DTV101
- INPUT +
SAT NAME : DTV101
- INPUT +
LONGITUDE 124.00 E
- INPUT +
1. Press YES to enter setup mode.
2. Press NEXT twice to enter edit satellite info mode.
3. Press YES to edit satellite in fo.
4. Set the satellite n ame.
PREV – Shows previous satellite name.
SELECT – Select the displayed satellite for editing.
NEXT – Shows next satellite name.
Press ENTER to move to next screen.
5. Input th e satellite name.
+ Increases the value. - decreases the value.
Change the underscored digit using the +/- buttons.
Press INPUT to accept the value and move to next
digit. Press BACK to move to previou s digit.
6. Press ENTER to move to next screen.
Press BACK to return previous screen.
7. Input the satellite position.
+increases a value. – decreases a value.
Change the underscored digit using the +/- buttons.
Press INPUT to accept the value and move to next
digit. Press BACK to move to previous digit.