Intellian i3 - Operating the ACU - DiSEqC 1.2 Usage; Setting the Use of DiSEqC 1.2

Operation Using the ACU 39
Setting the GPS
It is possible to set up and modify the GPS information, which enhance the
antenna function.
SETUP MODE?
YES NO
SET SAT PAIR ?
PREV YES NEXT
LONGITUDE ###.## E
- INPUT +
x1
SET GPS ?
PREV YES NEXT
LATITUDE ##.## N
- INPUT +
LONGITUDE ###.## E
- INPUT +
SAVE ?
YES NO
1. Press YES to enter setup mode.
2. Press NEXT to enter GPS setup mode.
3. Press YES to set GPS.
4. Input the longitude data.
+increases the value. – decreases the value.
Change the underscored digit using the +/- buttons.
Press INPUT to accept the value and move to next
digit. Press BACK to move to previous digit.
6. Input the latitude data.
+increases the value. – decreases the value.
Change the underscored digit using the +/- buttons.
Press INPUT to accept the value and move to next
digit. Press Back to move to previous digit.
5. Press ENTER to move to next screen.
Press BACK to move to previous screen.
7. Press YES to accept data.
Press NO to cancel and retu rn to main setup menu.