Intellian i3 - Operating the ACU - LNB Skew Settings (i4 P); Setting the LNB Skew (i4 P)

40 i3/i4 Satellite Antenna System – Install and User Manual
Setting the DiSEqC Method
DiSEqC selection is made at ACU. It is not recommended for a novice at
satellite service to use this mode.
SETUP MODE?
YES NO
SET SAT PAIR ?
PREV YES NEXT
SAVE ?
YES NO
x5
USE DISEQC ?
PREV YES NEXT
DO NOT USE DISEQC
PREV SELECT NEXT
1) DiSEqC Method
DO NOT USE DISEQC – DiSEqC is not using.
USE TO CHANGE BAND – DiSEqC is using to change to low and high band.
USE TO CHANGE SAT – DiSEqC is using to change tracking satellite
1. Press YES to enter setup mode.
2. Press NEXT five times to enter DISEQC mode.
3. Press YES to use DISEQC.
4. Select the DiSEqC Method
1)
PREV – Shows previous DiSEqC Method.
SELECT/ENTER – Set the displayed DiSEqC
method.
NEXT– Shows next DiSEqC Method.
Press ENTER to move to next screen.
5. Press YES to accept the selection.
Press NO to cancel and return to main setu p mode.