RFX Load Stick Systems
7005195 Rev A, August 2021
Page 16
INDICATOR OVERVIEW
Change Display Format (continued)
LOCK DISPLAY FORMAT
The Lock Display Format feature allows a specific display format to be displayed
immediately after power-up. The different display formats are presented in the Auto
Displays and Kart Displays sections. To activate Lock Display Format feature, select
the desired display format. Simultaneously press the RF key, the 3 key and CLEAR
key. The message DISPLAY CHOICE SAVED will be displayed for approximately 1
second. Turn the indicator off and then back on. The indicator will automatically display
the selected format when the indicator is turned on.
To unlock the Lock Display Format feature, simultaneously press the RF key, the 3 key
and the CLEAR key. The message DISPLAY CHOICE UNLOCKED will be displayed for
approximately 1 second. The Change Display Format menu will then be displayed when
the indicator is turned on.
BASELINE SETUP
ATTENTION: This feature on the indicator is designed to be used with the
RFX Scale Systems.
STORE BASELINE SETUP
Up to 99 setups can be stored in the indicator. Press the STORE/ENTER key to store a
weight setup as a target setup. Use the numeric keypad to enter the setup and save it
in a memory location (from 1 to 99). If a setup has already been stored in the selected
location, the following message will be displayed:
To continue with the save and overwrite the information that currently resides in the
location, press the 1 key. To save the setup to another location, press the 2 key to exit
the memory location.
* THIS MEMORY SPOT *
* ALREADY HAS DATA *
1: OVERWRITE
2: EXIT
To Next Page
Loading...
