RFX Load Stick Systems
7005195 Rev A, August 2021
Page 35
TROUBLESHOOTING
IOS PAIRING
If the Bluetooth Pairing Request times out after 30 seconds or is cancelled when pairing
an iOS device with the Bluetooth indicator for the first time, the iOS device will remain
connected with the indicator it was being paired too. However, the iRaceWeigh app did
not finish the connection process. When the iRaceWeigh connection is refreshed again,
the indicator will not be found.
1. Open the iOS device Settings Menu.
2. Proceed to Bluetooth section. The indicator will be displayed in a Connected Status.
3. Turn off Bluetooth to break the connection to the indicator.
4. Turn Bluetooth back on.
5. If ready to pair the iOS device with indicator and have the PIN readily available,
attempt to reconnect using the iRaceWeigh app.
To Next Page
Loading...
