Chapter 4: Menu reference
CDC4 Door Controller Installation and Programming Manual 95
Deny access
If the option is set, and there are more users in the region that it is configured by
“High Limit” on page 93, entering the region is denied until the user count
becomes smaller than this value.
Alarm control level tab
The Alarm control levels tab shows a list of alarm control levels for the door
controller.
Click Browse “...” button to open the Alarm control level dialog.
Schedule
Specify a panel schedule to apply to this alarm control level. The alarm control
level is only available if the schedule is valid.
Areas
An alarm control level can only control the functions of areas that are assigned to
it. An alarm control level can be linked to multiple areas. For each area, the alarm
control level can control the area permissions for arming, disarming, alarm reset,
and for timing.
Click the Browse “...” button to open a dialog to assign a particular area to the
alarm control level. In the dialog, select the required area from the Areas list.
The following permissions for each area can be changed:
• Arm: A user with the appropriate alarm group can arm the area.
• Disarm: A user with the appropriate alarm group can disarm the area.
Click the Delete button to remove the selected area data.
To Next Page
Loading...
Need help?
General
