Interlogix NX-595E - User PIN - Disabling; User Partition - Configuration

30 NX-595E User Manual
User PIN – Disabling
How to: Disable a pin code from a specific user
Step Example Disable the PIN code that is configured for user 5
1.
[PIN] Call the NX-595E via an offsite touch-tone phone to begin the session.
2.
Press [0] for system configuration menu.
Press [1] for user configuration menu.
Press [1] for user PIN configuration.
3.
Select a user number followed by # (e.g., User 5.)
4.
Press [0] followed by # to disable user.
5.
1
st
star, moves back to user configuration menu.
2
nd
star, moves back to system configuration menu.
3
rd
star, moves back to main menu.
# Disconnects session.

User Partition – Configuration

How to: Remove partition control from a specific user
Step Example
Remove control of partition 2 from user 4.
In this example, it is presumed a total of two partitions only exist and
user 4 has control of both partitions.
1.
[PIN] Call the NX-595E via an offsite touch-tone phone to begin the session
2.
Press [0] for system configuration menu.
Press [1] for user configuration menu.
Press [2] for user partition configuration.
3.
Select a user number followed by # (e.g., user 4.)
4.
Press the partition number to change selection, (e.g., deselects partition
2.) (partition/partitions can be toggled on/off.)
5.
1
st
star, moves back to user configuration menu.
2
nd
star, moves back to system configuration menu.
3
rd
star, moves back to main menu.
# Disconnects session.
Creating and deleting the user PIN:
Your control panel determines the number of available user PIN codes, contact
your service provider to confirm available user PIN codes on your system.
If you attempt to enter a user PIN code in your security system that is being used
by another user, your NX-595E will announce "PIN code has failed", simply
select another PIN code.
Keep user PIN information in a safe place and do not disclose your PIN to others.