48 NX-595E User Manual
After a called party answers the phone, the NX-595E will announce:
Call from (system name 0.6.8.)
Alarm condition active.
Enter your code for system access.
Press star to cancel.
Enter your pin code to hear the full alarm condition and take control of the
security system.
Users
The user configuration menu is where user PIN codes are assigned to users. A
user code is used to arm and disarm partitions within your security system. They
are generally four digits in length, but can be configured to be six digits in length
if this level of security is required (contact your security provider to enable 6 digit
PINs).
The authorization level determines the options available to that user, user
authorization is where you would alter and increase a users authority to become
a Master Code. Master codes can only create, delete or modify user codes with
equal or less authority than themselves.
The user configuration menu is where you also assign partition control and adjust
authorization levels to each user. Assigning partitions to users, determines which
sections (partitions) of the security system a user may access.
To Next Page
Loading...
