Interlogix NX-595E User Manual

32 NX-595E User Manual
Menu 0 - S
y
stem Confi
g
uration
 0.1 User Configuration
 0.2 Time & Date
0.2.1 Time
0.2.2 Date
0.3 Partition Entry Time
0.4 Partition Exit Time
0.5 Phone number configuration
0.6 Voice message recording
Time and Date Configuration
Having the correct time and date is essential for accurate reviewing of the
internal log.
NX-181xx Voice keypads can also be configured to announce the time and date
whenever the system is armed or disarmed.
How to: Configure the Time and Date
Step Example Setting the time as 9.30AM, and the date as 19.6.2010
1.
[PIN] Call the NX-595E via an offsite touch-tone phone to begin the session
2.
Press [0] for system configuration menu
Press [2] for time and date configuration menu
Press [1] for time configuration
3.
Select the hours value from 1 ~ 12, followed by # (e.g., 9 o’clock.)
4.
Selects the minutes value, followed by # (e.g., 30 minutes.)
5.
Press 1, to set AM time (e.g., AM time.)
Press 2, to set PM time
Note: Time change is complete, move to step 6 only if you wish to
change the date, otherwise move directly to step 10 and exit the
system.
6.
Press [2] to configure the date
7.
Select the day value from 1 ~ 31, followed by # (e.g., 19
th
day.)
8.
Select the month value from 1 ~ 12, followed by # (e.g., June 6
th
month.)
9.
Select a 4 digit year value, followed by # (e.g., year 2010.)
10.
1
st
star, moves back to system configuration menu.
2
nd
star, moves back to main menu.
# Disconnects session.

Interlogix NX-595E Specifications

General

Quantity	1
Compatibility	V2 (NX-4, NX-6, NX-8, NX-8E, NX-7, NX-9, NX-10, NX-11)
Operating temperature (T-T)	0 - 49 °C

Weight and Dimensions

Depth	90 mm
Width	220 mm
Height	45 mm
Weight	130 g
Dimensions (WxDxH)	220 x 90 x 45 mm