Interlogix NX-595E User Manual

46 NX-595E User Manual
Main Menu – Standard User Code
Status and Partition Control
This menu allows for easy operation of the NetworX security system, from arming
and disarming individual partitions to reviewing the systems 185 event log.
Up to 8 active partitions can be displayed, and control can be individual or as a
group. Active partitions will be populated on the buttons on the right, with the
screen shot above showing only one active partition, with all zones secure and
disarmed.
To arm (turn on) an individual partition(s), click on the partition number(s) in the
On Away Mode row. To fully arm all partitions, click the All button in the On Away
Mode row. The corresponding partition number(s) will illuminate red indicating a
successful arm of that partition.
To stay arm (partially turn on) an individual partition(s), click on the partition
number in the On Stay Mode row. To stay arm all partitions, click the All button in
the On Stay Mode row. The corresponding partition number(s) will illuminate
yellow indicating a successful stay arm of that partition.
To disarm partition(s) from either the stay or away arming modes, click on the
partition number to be disarmed in the Off row. To disarm all partitions, click the
Partition 1
Partition 1

Interlogix NX-595E Specifications

General

Quantity	1
Compatibility	V2 (NX-4, NX-6, NX-8, NX-8E, NX-7, NX-9, NX-10, NX-11)
Operating temperature (T-T)	0 - 49 °C

Weight and Dimensions

Depth	90 mm
Width	220 mm
Height	45 mm
Weight	130 g
Dimensions (WxDxH)	220 x 90 x 45 mm