ZeroWire Reference Guide 27
Menu 3 - Zones
A zone (sometime referred to as an input) on the ZeroWire is a single physical
hardwired connection or a non-physical wireless connection. Additionally zones
on the ZeroWire can be used as logic inputs within actions (see Menu 8 –
Actions) and / or be configured as one of many zone types that greatly increase
the functionality of the ZeroWire system.
Zone Number
The ZeroWire can support a total of 64 zones. Each zone is identified by a
unique zone number, which cannot be altered, and remains as the key reference
for each zone.
Zone Name
Each zone can be configured with a custom 32 character name. The zone name
is displayed wherever a zone is referenced on the ZeroWire system.
First Zone Profile
Zone profiles determine the zone type (Entry, 24 hour, fire, key switch, etc.) and
the zone options (bypass, force arm, Twin Trip, stay mode, etc.). Zone profiles
also determine the area in which the zone resides in. Additionally, each profile
has a schedule that ZeroWire uses to determine which of the two zone profiles to
use and when to use them.
Zone Type
Zone types are configured in Menu 15 – Zone Types. One of 32 configurable
zone types may be allocated to any zone’s zone type. Each zone type can
behave independently between an arm and disarmed state. Zone types
determine the zone attributes, siren attributes and zone attribute options.
Here is an example of a default zone type:
To Next Page
Loading...
Need help?
General
