44 ZeroWire Reference Guide
WiFi Password
Password required to access the WiFi network. Ask the administrator if you are
not sure.
Ports
Here are the ports that the computer needs to communicate with the ZeroWire
system.
Defaults:
• HTTP Port = 80
• HTTPS Port = 443
• Download Port = 41796
Time Server
Enter the URL or IP address of a time server to allow the ZeroWire to
automatically update and synchronise its clock without user intervention. The
default is pool.ntp.org
IP Options
• Enable DHCP: Allow the ZeroWire panel to be automatically assigned an IP
address by the network.
• Enable Ping: Allow the ZeroWire panel to respond to the PING command.
• Enable Clock Updates: Allow the ZeroWire internal clock to synchronise with
the internet time server specified.
• Enable Web Program: Enabling this option will cause ZeroWire Web Server
and UltraSync + app to always display the Advanced menus when an installer
logs in.
Disabling this option will hide the Settings and Advanced menu on ZeroWire
Web Server and UltraSync + app regardless of the login. To reveal the
Settings and Advance menus, have a Master User press Menu 8 and enter
their PIN code on the ZeroWire keypad. This provides greater security by
disabling web programming until a user with adequate permissions enters
their PIN on the physical ZeroWire panel on-site.
• Always Allow DLX900: Enabling this option will allow DLX900 to connect at
any time if the correct Download Access Code is provided. Disabling this
option provides greater security by only allowing DLX900 to connect when
program mode is active. This allows the system to have DL900 access
disabled until a user on site with physical access to the keypad enters
program mode with a valid PIN code.
ZeroWire will be in program mode if a user gains authorized access to menu
5, 8, or 9.
• Monitor LAN: When the Monitor LAN option is enabled the panel will monitor
the Ethernet port for a valid Ethernet cable. If the Ethernet cable is
disconnected while this option is enabled, and the panel is unable to
communicate, it will log a Fail To Communicate event.