ZeroWire Reference Guide 63
Menu 11 - Permissions
Permissions control what a user or device has access to on the ZeroWire system
and what they can do.
Permission Number
The ZeroWire can support a total of 16 Permissions. Each set of Permissions is
identified by a unique number, which cannot be altered, and remains as the key
reference for each Permission.
Permission Name
Each group can be configured with a custom 32-character name. The name is
displayed wherever Permissions are referenced on the ZeroWire system.
Control Groups
Menu Group
This controls what menus the user or device can access
Arm Area Group
This controls which areas can be armed.
Disarm Area Group
This controls which areas can be disarmed.
Reset Only Area Group
This controls which areas can be reset only.
For example, if a guard is present on the site you may not want them to be able
to disarm any areas. By assigning them a Reset Only Area Group, they can turn
off alarms, but they cannot accidentally disarm an area.
Timed Disarm Area Group
This controls which areas can be timed disarm.
Man Down Area Group
This controls which areas will have man down monitoring.
Guard Tour Area Group
This controls which areas are a part of the guard tour.
Report Channel Group
This controls what channels the user can modify.
To Next Page
Loading...
