ZeroWire Reference Guide 77
Zone Contact Options
These options apply to the hardwire inputs, not wireless zones.
Normally Open no EOL
If enabled, the zone circuit is normally open. Default is off.
Fast Loop
If enabled, the ZeroWire will be more sensitive and respond quicker to a change
in state to hardwired zones. For example, we could enable this on a door contact
to trigger the turning on of lights quicker when someone opens the door by using
an Action. Depending on the application this may increase the chance of a false
alarm if the zone is used for intrusion detection.
Zone Report Event
Select the CID and SIA event code to report when this zone is tripped. Refer to
Appendix 1: Reporting Zone Codes in Contact I.D. on page 86.
To Next Page
Loading...
