Interlogix ZeroWire Reference Guide

80 ZeroWire Reference Guide
If a zone or area event is generated, then the event is sent to the Channel Group
specified (Area > Area Event Reporting > Channel Group) in the lowest area the
zone belongs to. The Channel Group forwards the event to each of the Channels
it contains. Each Channel checks its Event List to determine if the event should
be sent.
Example
Channel Group Number
The ZeroWire can support a total of 16 Channel Groups. Each Channel Groups
is identified by a unique number, which cannot be altered, and remains as the
key reference for each Channel Group.
Channel Group Name
Each group can be configured with a custom 32 character name. The name is
displayed wherever an Action Group is referenced on the ZeroWire system.
Channel Group
For each Channel Group, select the Channels where the event should sent.
Channel Group 1
Channel 1
Channel 2
Channel 3
Zone 3 in Alarm
Area Group = 1
Area Group 1
Menu 12 – Area Groups
Area 1
Area 2
Menu 4 – Areas
Channel Group 1
Area 1
Zone sends alarm to area group
Event sent to lowe st area
Channel 2
Control Room 2
Event List = 1
Next Channel = 5
Channel 3
Email
Event List = 2
Next Channel = 0
Channel 1
Control Room 1
Event List = 1
Channel Attempts = 3
Next Channel = 4
Menu 18 – Channel Groups
Area sends event to Channel
Group
Channel Group sends Event
to
every Channel It contains
Menu 5 – Channels
Channel 5
Control Room 2
Event List = 1
Next Channel = 0
Channel 4
Control Room 1
Event List = 1
Channel Attempts = 3
Next Channel = 0
Channel checks to see if the
event is on its Event List, if yes it
will attempt to send, if not then it
stops
Menu 3 – Zones
If it does not succeed after
Channel Attempts, it will try
sending on the next Channel

Interlogix ZeroWire Specifications

General

Brand	Interlogix
Model	ZeroWire
Category	Security System
Language	English