36 ZeroWire Reference Guide
At the end of the user’s man down time, the Auto Arm Warning will activate for
the set period. At the end of the Auto Arm Warning period the area will arm and if
configured, report a man down alarm. Anytime during the man down period,
authorized users with the Area Type Override set in their active profile will cancel
the man down time period by disarming or disarming the area.
Guard Tour: Guard tour is used when an authorized user(s) (such as a guard) is
required to regularly “check-in” to notify others that they have physically attended
to a location(s) on the site. If the authorized user(s) fails to perform this action the
system can set an audible warning and report a “Guard Tour Fail” event.
The following conditions must be true before guard tour function will occur:
• The area type must be selected to guard tour.
• The area type schedule must be active (after the start time and before the
end time).
• The user’s active profile’s permission must have:
• This area set in the permission’s guard tour group.
• The permission must be in schedule.
• The permission’s Area Type Override must NOT be set.
The guard tour time is set in the user’s permission.
At the end of the user’s guard tour time, the Auto Arm Warning will activate for
the set period and keypad sounder will be active. At the end of the Auto Arm
Warning period the area will arm and if configured, report a Guard Tour Fail
alarm. Anytime during the guard tour period, authorized users with the Area Type
Override set in their active profile will cancel the guard tour time period by
disarming or disarming the area.
Early Open/Late Close: If the area type is Early Open & Late Close, the Auto
Arm Warning sets the period after the start (opening) and the end (closing) of the
area type schedule that the area must be either disarmed or armed.
For example, if the area type schedule is set between 8:00 AM (opening time)
and 5:00 PM (closing time) and the Auto Arm Warning is set to 15 minutes; then
the area must be disarmed between 8:00 AM and 8:15 AM otherwise if it is
disarmed before 8:00 AM it is an early open, if it is disarmed after 8:15 AM it is
late to open. Likewise the area must be armed between 5:00 PM and 5:15 PM
otherwise if it is armed before 5:00 PM it is an early close, if it is armed after 5:15
PM it is late to close.
Area Type Schedule
Schedules are configured in Menu 7 – Schedules. One of 96 configurable
schedules can be allocated to the area type schedule. The area type schedule
determines the schedule that the selected area type is active. Area types are not
active when the schedule is not active. If an area type schedule is disabled
(always active) that area will always have the type characteristics programmed in
Area Type.
Example:
To Next Page
Loading...
