Interlogix ZeroWire - Perform a Battery Test; Perform a Communicator Test

ZeroWire Reference Guide 53
• Event Start Range
• Event End Range
• Event Combination Logic
Event 3
• Event Category
• Event Type
• Event Start Range
• Event End Range
• Combination Logic
Event 4
• Event Category
• Event Type
• Event Start Range
• Event End Range
• Event Combination Logic
Result
The ZeroWire can also perform an additional function once the Action Event
conditions are satisfied, this is called an Action Result.
For example, when a fire alarm is active, you could disable Users 1-40 to prevent
them from being able to control the alarm system.
Result Category
The category of the Action Result to perform. Reference the Table 3 on page 56.
Result Type
The event of the Action Result to perform. Reference the Table 3 on page 56.
Result Start Range
Select the starting number of the event that you want the Action Result to affect.
Result End Range
Select the ending number of the event that you want the Action Result to affect.
Result User Number
Select the User that you want the Action Result to behave as. This will apply this
user’s full permissions to the Action Result you select.