Interlogix ZeroWire - Page 82

82 ZeroWire Reference Guide
Alarm System Action
• Result Type: The event of the Action Result to perform. Reference the
Table 7 on page 83.
• Result Number: Select the area / scene / camera number to control.
Z-Wave Device Action
To display Z-Wave Action Types you must first learn in a Z-Wave device. The Z-
Wave device name will then appear.
• Action Device: select the Z-Wave device you want to control
• Z-Wave Type 8 Setting 1: depends on Z-Wave device. May include options
such as On, Off, Heat, Cool, Auto, Up, Down, Lock, Unlock.
• Z-Wave Type 8 Setting 2: depends on Z-Wave device
• Z-Wave Type 8 Setting 3: depends on Z-Wave device
• Z-Wave Type 8 Setting 4: depends on Z-Wave device
• Z-Wave Type 8 Setting 5: depends on Z-Wave device
• Z-Wave Type 8 Setting 6: depends on Z-Wave device
• Z-Wave Type 8 Setting 7: depends on Z-Wave device
• Z-Wave Type 8 Setting 8: depends on Z-Wave device
Table 6: Activate Events Types
Scene Event Type
Disabled
Zone Open
Zone Not Open
Zone Alarm
Area On Away
Area On + Bypass
Area On Stay
Area Not On Away
Entry Delay
Exit Delay 1
Exit Delay 2
Area Zone Bypass
Area Tamper
Area Not Ready
Area Zone Low Battery
Area Zone Supervision Fault
Area Alarm
Area Burg Alarm
Area Fire Alarm
Area Panic Alarm
Area Auxiliary Alarm
Scene Event Type
Area Siren
Area Fire Siren
User PIN Entered
Action Function True
Action Function False
Schedule Activated
Schedule Deactivated
Smoke Power Reset
Turn On By User
Turn Off By User
Geosphere 1 Entered
Geosphere 1 Exited
Geosphere 2 Entered
Geosphere 2 Exited
Key A
Key B
Key C
Siren On
Z-Wave Devices