Interlogix ZeroWire - Page 87

ZeroWire Reference Guide 87
Appendix 2: Reporting Fixed Codes in
Contact I.D.
The table below lists the CID event codes sent for the following reports (if
enabled). The number in brackets following the event is the number that will be
reported as the zone number if extended Contact I.D. is enabled in the system
options. Otherwise zone ‘0’ will always be reported. If there are no parentheses,
the zone will be reported as ‘0’.
Report
Contact
I.D. Event
Manual Test
601
Auto test Open (user number)
602
Close (user number)
401
Cancel (user number)
406
Download Complete
412
Start Program
627
End Program
628
Ground Fault
310
Ground Fault Restore
310
Recent Close (user number)
401
Exit Error (user number)
457
Event Log Full
605
Fail To Communicate
354
Expander Trouble
333
Expander Restore
333
Telephone Fault
351
Telephone Restore
351
Siren Tamper
321
Siren Restore
321
Aux Power Over Current
312
Aux Power Restore
312
Low Battery
309
Low Battery Restore
309
AC Fail
301
AC Restore
301
Box Tamper
137
Box Tamper Restore
137
Keypad Tamper
137
Keypad Panic
120
Duress
121
Keypad Fire
110
Keypad Medical
100
RF Zone Lost (zone number)
381
RF Zone Restore (zone
number)
381
Zone Low Battery (zone
number)
384
Zone Battery Restore (zone
number)
384
Zone Trouble (zone number)
380
Zone Trouble Restore (zone
number)
380
Zone Tamper (zone number)
137
Zone Tamper Restore (zone
number)
137
Zone Bypass (zone number)
570
Bypass Restore (zone
number)
570
Zone Inactivity
391
Late To Close
454
Forced Door
423