Chapter 3 — Configuring the Computer
CN3 Series Mobile Computer User’s Manual 85
The Profile Wizard appears.
2 From the Profile list, select the profile you want to configure.
3 Tap Edit Selected Profile.
4 (Optional) Give your profile a meaningful name by selecting
the text in the Profile Label text box and typing a meaningful
name.
5 From the Network type list, select either Infrastructure or
Ad-Hoc.
Select Infrastructure if the network uses access points to
connect to the corporate network or internet. Select Ad-Hoc
to set up a private network with one or more participants.
6 Enter the SSID (Network Name) if different than the profile
name.
7 (Optional) Check the Enable Power Management box to
conserve battery power.
8 Click OK.
Configuring WEP Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose None.
To Next Page
Loading...
