Chapter 3 — Configuring the Computer
CN3 Series Mobile Computer User’s Manual 95
7 Select Prompt for password to have the user enter this
password each time to access the protocol, or select Use
following password to use the protocol without entering a
password each time you use the CN3.
8 Tap Additional Settings to set options for PAC management
and assign an anonymous EAP-FAST name.
9 Tap PAC Manager to view the PAC files currently installed
on the CN3. Tap ok to return to the Additional Settings
screen.
10 If you already have a PAC on the CN3, clear Allow
Automatic PAC provisioning to avoid receiving more PACs
from the server.
11 If you select Allow Automatic PAC provisioning, you can
check:
• Prompt before acquiring a new PAC for notification of
any incoming PACs.
• Prompt before replacing a PAC for notification whether
to replace a current PAC with an incoming PAC.
12 For Anonymous EAP-FAST Name, type the outer identity
assigned for public usage.
13 Tap OK.
To Next Page
Loading...
