Chapter 3 — Configuring the Computer
CN3 Series Mobile Computer User’s Manual 53
3 Select how you would like to set your scanner (the default is
Search) and then click Next. The computer starts discovering
scanners.
4 Select the scanner you want to connect to from the Devices
list and then tap Next.
5 When prompted to add the scanner to your device list, tap
Yes.
6 In the Passcode text box, enter the passcode for your scanner.
The default passcode for Intermec Bluetooth scanners is
0000.
7 Tap Next. The computer connects to the scanner and displays
the remote device information.
8 Tap Finish.
9 Refresh Intermec Settings to see the Bluetooth scanner under
Data Collection. You can now view and modify any
symbology settings.
To remove a wireless scanner from the computer
1 Select Start > Settings > the System tab > Bluetooth Scanner
Wizard.
2 Tap Remove Device.
To Next Page
Loading...
