Chapter 3 — Configuring the Computer
66 CN3 Series Mobile Computer User’s Manual
Use the Ping tab to contact with any host in your network for
information.
The Ping Tab
To ping a host
1 From the Host drop-down list, select an IP address for the
host you want to ping. Enter a new IP address using the input
panel or the keypad. Select Clear List to remove all the IP
addresses from the drop-down list.
2 From the Repetitions drop-down list, select the number of
times to ping the selected host. These repetitions are done
once per second.
3 Tap Ping to initiate contact with the selected host.
4 Depending on how the screen is set up, you can toggle
between a graph and a list of ping results:
•Tap Graph to toggle to the graphical view of 25 of the
most recent pings and their response results, like in the
following sample graph:
To Next Page
Loading...
