EasyCoder 4420/4440 Bar Code Label Printer User’s Manual
*1233*
xii
Terms and Conventions
The following special terms and conventions occur throughout the manual. Refer to the
glossary for a complete list of terms.
Terms
“Printer” refers to the 4420 and the 4440 bar code label printer.
“4420” or “4440” refers to the specific model 4420 or 4440 bar code label printer.
“Media” is the label stock (including thermal transfer ribbon) on which the printer
prints labels.
“Host” refers to a personal computer or other computer that communicates with the
printer.
Conventions
The following conventions are used throughout this manual for operating procedures
and descriptions of the printer.
•
Feed/Pause refers to the Feed/Pause button on the printer front panel.
•
Downloaded commands appear in the order that you enter them into the printer
with the following conventions:
Convention Description
< > Angle brackets < > enclose mnemonic representations of ASCII control
characters. For example, <ETX> represents the ASCII “End of Text” control
character.
data
Italic text represents variable data, which you must replace with a real value. For
example,
n
signifies a variable for which you must designate a constant value.
[
data
] Italic text within brackets represents optional data.
Ctrl
Bold text represents a key on your keypad. For example,
Ctrl
represents the Ctrl
key.
Ctrl
-
Z
When two keys are joined with a dash, press them simultaneously. For example,
if you see the command
Ctrl
-
Z
, press the two keys at the same time.
E3;F3
Type all characters that appear in the Courier font by pressing an individual key
on the keypad.
Other Intermec Manuals
You may need additional information when working with the 4420 or 4440 in a data
collection system. Please visit our Web site at www.intermec.com to download many of
our current manuals in PDF format. To order printed versions of the Intermec manuals,
contact your local Intermec representative or distributor.
To Next Page
Loading...
Need help?
General