11Intermec EasyCoder 501 – Service Manual Ed. 7
Chapter 1 Models and Options
1.1 Identifi cation, cont.
A Paper Cutter Unit is easily recognized by the extension on the
printer's front, where the cutter replaces the front hatch (see Chap-
ter 12). The EasyCoder 501 LinerLess has a spcial cutter.
By opening the front hatch (or the optional cutter unit fi tted in its
place), you can check if the printer is fi tted with a Memory Card
Adapter (see Chapter 13) and/or a Label Taken Sensor (see Chap-
ter 11).
Paper Cutter Unit
Label Taken Sensor
Memory Card Adapter
inside
To Next Page
Loading...
