Chapter 1 — Using the Printer
4 PM4i Mid-Range Printer User’s Manual
To select your printer language
• Press the key that corresponds to the printer language you want to
run on your PM4i.
Startup Screen: This screen appears the first time you turn on your PM4i.
The language you select automatically runs each time you turn on
your printer.
Once your printer is running a particular printer language, you can
change the printer language from the Setup menu. The way that you
access the command language menu depends on which language you
are currently running.
Changing the Printer Language From the Setup Menu
Language How to Access the Command Language Menu
IPL
• Go to SETUP > TEST/SERVICE > CMD
LANGUAGE.
Fingerprint or
Direct Protocol
• Go to SETUP > PRINT DEFS > CMD LANGUAGE.
ZSim or DSim
1 Press T.
2 Enter the Fingerprint password: 8311.
3 Press E.
4 Go to SETUP > PRINT DEFS > CMD LANGUAGE.
Status
4i
PM
F1=FP, F2=IPL
F3=ZSIM, F4=DSIM
Shift Enter
F3
F5
F2
F4
F1
Setup
To Next Page
Loading...
