Chapter 3 — Configuring the Printer
PM4i Mid-Range Printer User’s Manual 75
Configuring 802.1x Settings
The 802.1x settings page is only available if you have the optional
wireless interface installed in your printer. Use the 802.1x page to view
and change 802.1x security settings.
To configure 802.1x settings
1 Click Network Admin > 802.1x.
2 View or update your settings.
3 Click Submit 802.1x settings.
Authentication Sets the type of authentication for you use for WEP
keys. You can choose between Auto, Open System, and
Shared.
WPA Sets the Wi-Fi Protected Access (WPA) to either on or
off.
WPA Pre-shared
key
Sets the WPA Pre-shared key.
WPA2 Sets the Wi-Fi-Protected Access version 2 to either on or
off.
Roaming setting Sets the roaming reluctancy to 1, 2 or 3. Setting the
roaming reluctancy to 0 turns off the roaming feature.
Current channel
(Read only or read/write for adhoc connections)
Shows the current channel being used.
AP MAC Address (Read only) MAC address of the access point to which
the printer is connected.
Signal strength (Read only) Radio signal strength of the access point.
Speed (Read only) Speed of the current connection.
Region (Read only) Shows the country short names provided
by the 802.11d standard for the currently selected
region or country.
Understanding the Wireless LAN Settings (continued)
Setting Description
To Next Page
Loading...
