Appendix A — Specifications
120 PM4i Mid-Range Printer User’s Manual
Media Specifications
Core and Roll Specifications
Non-Adhesive Strip
Media Type
Set media type to one of these values:
• Fingerprint:
• FIX LENGTH STRIP
• VAR LENGTH STRIP
• IPL: CONTINUOUS
Measurement Value
Core inside diameter, standard 38 to 40 mm (1.5 in)
Core inside diameter, with adapter 76.2 mm (3 in)
Core width must not protrude
outside the media
Maximum roll outside diameter 213 mm (8.38 in)
Minimum media width, standard 25 mm (1.00 in)
Minimum media width, fanfold guides 40 mm (1.57 in)
Minimum media width, non-adhesive strip 25.0 mm (1.00 in)
Maximum media width, non-adhesive strip 114.3 mm (4.50 in)
Minimum media width, self-adhesive strip, with liner 25.0 mm (1.00 in)
Maximum media width, self-adhesive strip, with liner 114.3 mm (4.50 in)
Minimum media width, self-adhesive strip, without
liner
25.0 mm (1.00 in)
Maximum media width, self-adhesive strip, without
liner
114.3 mm (4.50 in)
Media Width (a)
Measurement Value
Maximum 114.3 mm (4.50 in)
Minimum 25.0 mm (1.00 in)
To Next Page
Loading...
