Chapter 1 — Using the Printer
PM4i Mid-Range Printer User’s Manual 29
Loading Media From an External Supply
You can place the media supply, such as fanfold tickets or tags, behind
the printer. The external supply can be used with tear-off (straight-
through) and cut-off printing.
Intermec strongly recommends using a printer fitted with a special
fanfold guide. This guide makes loading media easier and accurately
guides the media. The fanfold guide can be adjusted for various media
widths down to 40 mm (1.57 in).
Fanfold Media Path
Note: Make sure to protect the media from dust, dirt, or other foreign
particles that can impair the printout quality or cause unnecessary
wear to the printhead.
To Next Page
Loading...
