Intermec PM4I - Configuring Wireless LAN Settings

Chapter 3 — Configuring the Printer
74 PM4i Mid-Range Printer User’s Manual
3 Click Submit Avalanche settings.
Use the following table to understand the Avalanche settings.
Configuring Wireless LAN Settings
Use the Wireless LAN page to view and change 802.11 settings.
To configure wireless LAN settings
1 Click Network Admin > Wireless LAN.
2 View or update your settings.
3 Click Submit 802.11 settings.
Use the following table to understand the Wireless LAN settings.
Understanding the Avalanche Settings
Setting Description
Enabler Mode Click one of the option buttons:
• Disabled: Disables Avalanche.
• Manual settings: Enables Avalanche. You need to
enter the Agent address and Port in the text fields.
• Find agent by broadcast: Enables Avalanche and
the network connection broadcasts to find the
agent.
Agent
authorization
Enter your user name and password in the entry fields.
Note: The Wireless LAN settings are only available if your printer has
the wireless 802.11 radio interface option installed and is running
Fingerprint 8.77.0 or later, or IPL v2.77.0 or later.
Understanding the Wireless LAN Settings
Setting Description
SSID The network name of the printer.
Mode Set the operating mode of the device to Ad-Hoc or
Infrastructure.
WEP Set Wired Equivalent Privacy (WEP) to on or off.
WEP Keys You can enter values for up to 4 WEP keys.
Active WEP key Chooses the active WEP key.